Adj 1/4 w/ guide for IDF system (9) - 920566096
Skip Navigation Website Accessibility
 


Adj 1/4" w/ guide for IDF system (9)

left in stock in

Low in store inventory, may be subject to change

Piecing: The Adjustable 1⁄4” Foot with Guide is designed to help you achieve a 1⁄4 “(6mm) or scant 1⁄4” (less than 6mm) seam when piecing.
The needle hole in the foot is oval shaped allowing you to adjust the needle position.The distance between the center needle position and the guide is 1⁄4” (6mm).
 
1. Snap-on the Adjustable 1⁄4” Foot with Guide. *

2. Select a straight stitch.
a. For a 1/4” (6mm) seam; select a centered the needle position.
b. For a scant 1/4” seam; adjust the needle position one or two steps to the right.

3. lace the fabric pieces right sides together under the presser foot, aligning the edges of the
fabric with the guide on the foot.

4. Sew the fabric pieces together guiding the fabric so that the edges touch the guide. 5. Press the seam allowance.
Note: Depending on the weight of your fabric and thread it may be necessary to adjust the needle position to achieve your desired seam allowance. Move the needle to the right to decrease the seam allowance and to the left to increase it. You can safely move the needle three steps in either direction, but not more.

* Do not use the Straight stitch plate when using the Adjustable 1⁄4” Foot with Guide.
Topstitching: The Adjustable 1⁄4” Foot with Guide is also wonderful for topstitching.Adjust the needle position and use the guide to place your stitching exactly where you want it on your blocks, garments or home decor projects.